Click on the processor links for more details and downloads.
|
Sales Code
|
Description
|
Block Diagram
|
| K-510
Leaflet
|
SCSI / Memory Card
This dual purpose board extends the I/O facilities of the CPU by adding a SCSI protocol controller and 4 JEDEC 32 pin memory sockets. The board is available for VMEbus and ModuleBus systems
|
 |
| K-620
Leaflet
|
Quadrature Shaft Decoder
This board decodes the output from a shaft encoder as used in motion control for accurate positioning and provides a number of options. Up to 8 channels of decode are available for ModuleBus & VMEbus systems
|
 |
| K-630
Leaflet
|
Counter Card
This card provides 8 channels of independent 16-bit counters with a wide range of options. This configurable card is available with software or hardware reset facilities
|
 |
| K-316
Leaflet
|
16-Bit Analogue
The K-316 is a full featured analogue card provides 16 differential channels at 16-bits. The gain is selectable in software. Data throughput rate is 20 samples per second. |
 |
| K-600
Leaflet
|
2 Channel Serial, Digital & Printer
This multi function 'combo' board extends the facilities of the CPU by adding two serial ports, 24 digital I/O lines, four special function I/O lines, a centronics printer port and six timer/counters.
|
 |
| V-354
Leaflet
|
12-bit Analogue Input Output
The V-354 provides analogue input and output to ModuleBus & VMEbus systems. The hardware can be configured as 32 single ended or 16 differential channels. The software programmable amplifier offers gains of 1, 10, 100 & 1000 with sample and hold with a throughput of 50KHz. The software interface is simple, with each read latching the next channel.
|
 |
| V-700
Leaflet
|
80 Channel Digital I/O
The V-700 single Euro-Card provides digital interfacing to ModuleBus & VMEbus systems. The card has 80 channels of bidirectional TTL digital signals on two industry standard (STE I/O Standard Bus) 50 way IDC style connectors. These connectors will accept a wide range of signal conditioning cards from our selection and many other suppliers
|
 |
| V-800
Leaflet
|
8 Channel Serial I/O
The V-800 provides serial interfacing for Module and VMEbus systems. Each of the eight channels can be configured for RS-422, RS-485, RS-432 or RS-232.
|
 |
Product Range 
